5 Coil heads BF-SS316 for Cubis
The Innocigs coil heads by Joyetech, specially designed for the Cubis tank, have a vertical winding with stainless steel wire and are equipped with high-quality cotton wool made of pure cotton, which leads to a clean and very good taste.
The heads with 0.5 ohms are designed for outputs of up to 30W and are ideally suited for pulmonary pulls.
The coil heads with 0.6 ohms are designed for outputs of up to 28W and are ideally suited for jaw pulls.
The atomizer heads with 1.0 ohms are designed for outputs of up to 25W and are ideally suited for jaw pulls.
The variants with the addition (IC) are identical to the Joyetech coil heads. They are only sold under the Innocigs brand.
Changing the coil head:
Unscrew the top cap with the atomizer head from the tank housing and remove the atomizer head by unscrewing it from the chimney.
Now take a new coil head and screw it into the chimney and finally the top cap back onto the tank housing.
Important: When using a new coil head, please wait 5 minutes before using it for the first time so that the cotton can soak up the liquid.
Please note that with these BF coils from Joyetech in combination with a liquid based on the “Advanced” base (55% PG – 35% VG – 10% H2O), i.e. a high proportion of water, the drip tip will splash out can.